Johnson Controls

Johnson Controls Valves & Actuators

Please note: Any product information on this website is for reference only. Please contact us for the latest product information.

VG1000 Series Ball Valves

Johnson Control’s VG1000 Series Ball Valves are designed to regulate the flow of hot or chilled water and, for some models, low-pressure steam in response to the demand of a controller in HVAC systems. Available in sizes 1/2 through 2 in. (DN15 through DN50), this family of two- and three-way forged brass valves is factory or field mounted to Johnson Controls VA9104, M9106, M9109, and M9100 Series non-spring-return and VA9203 and VA9208 Series spring-return electric actuators for on/off, floating, or proportional control.

Globe Valves

VG7000 Series bronze control valves are designed primarily to regulate the flow of water and steam in response to the demand of a controller in HVAC systems. These valves are available in normally open, normally closed, and three-way mixing configurations. Both electric and pneumatic actuators are available for factory or field mounting. VG7000 Series bronze control valves feature brass and stainless steel trim, and are available with threaded (NPT), union sweat, union globe, and union angle end connections. The modulating valve plug of VG7000 Series valves provides an equal-percentage flow characteristic for two-way valves, and equal percentage or linear for three-way valves. Tight shutoff is ensured using a molded elastomeric disk in valves with brass trim, and a precisely machined metal-to-metal seat for valves with stainless steel trim.

Flanged Globe Valves

Honeywell offers a full line of self-check, standard, and solid-state detectors for use with programmer and primary flame safeguard controls to provide flame supervision for gas, oil, or combination gas-oil burners.

Butterfly Valves

The VF Series butterfly valves are designed for a wide range of HVAC applications, including two-position or modulating control of hot water, condenser, or chilled water. They are compatible with all types of ANSI Class 125 / 150 slip-on and weld-neck flanges in two-way and three-way configurations. All valves are factory-tested for bubble-tight shutoff at 100% of the fully rated pressure. These valves are also bidirectional, allowing positive shutoff with the flow in either direction.

Zone Valves

J Series electric zone valves accurately control the flow of saturated steam, hot water, or chilled water through coils and heat exchangers of all types, in a wide range of HVAC applications. A variety of models handle all water system control needs as well as saturated steam applications of 15 psig or lower. The valves are designed to withstand the high moisture conditions found in many concealed fan coil installations. The J Series valve body features an integral seat, and is available in normally open, normally closed, and three-way mixing/diverting styles. The one-piece body design permits high pressure ratings of 300 psig.

VP140 Series Pressure Independent Control Valves

By combining a pressure regulator, a regulating valve, and a control valve, VP140 pressure-independent control valves (PICV) increase occupant comfort and system efficiency without the need for balancing valves. They are designed to regulate the flow of hot or chilled water and 50% glycol solutions in response to the demand of a controller in HVAC systems. VP140 rotary (ball) valve is ideal for applications that require enhanced flexibility for seasonal commissioning and different room layouts. VP140 compact axial (globe) valve is designed for applications where compact valve and actuator footprint is needed.

Gas Valves and Actuators

Honeywell’s combustion line includes a variety of gas valves and actuators for use on furnaces, ovens, atmospheric burners, commercial water heaters, rooftop make-up air units, power burners, and commercial/industrial boilers. Their portfolio includes diaphragm gas valves, single-stage, and dual-stage pressure regulating valves that combine the functionality of safety shut-off and pressure regulation in one unit; pilot gas valves; and industrial safety shut-off valves used with fluid-power actuators to control gas flow to commercial and industrial burners.

Johnson Controls