Reliable Gas Analyzers for Industrial Process Control
Gas analyzers deliver essential information related to our industrial customers’ gas stream compositions. Whether the customer requires a continuous gas analyzer for process control, In-situ oxygen measurement; continuous emission monitoring of stacks; or mass spectrometers for total characterization of the plant’s process streams and flare optimization, our manufacturing partners are prepared to address that application’s demands with the perfect gas analyzer.
Continuous Gas Analyzers for Process and Emissions Monitoring
Certain plants require a reading of the gas to be taken continuously during an operation where the outcome will dictate process adjustments or emissions tracking. This type of gas analyzer can be used to measure the concentration of selected components including oxygen, carbon monoxide, carbon dioxide, nitrogen oxides and sulfur dioxide. Based on the application’s demands, the continuous gas analyzer can also be configured to measure another compound at a very low concentration. The selection criteria will be dictated by the target gas, range, response demands, and operating environments.
For continuous measurement applications, explore Rawson’s continuous gas analyzers and reach out to the team to identify the gas components and conditions for the specified process.
Gas Chromatographs for Multi Component Analysis
A gas chromatograph allows for the separation of a gas stream to measure the different compounds contained within it. Such an application would be appropriate for a process in which a more detailed examination of the gas composition is required, for instance, in the form of hydrocarbon mixtures, natural gas or specialty gases. The range of compounds covered and the interval between readings will be determined by the type of detector and method employed. Rawson notes that the analysis cycle for gas chromatograph is typically in the region of three to ten minutes, although this will vary depending on the configuration.
Consider Rawson’s gas chromatographs for gas stream analysis applications requiring multi component gas analysis rather than single gas concentration reading.
Moisture Analyzers for Water in Gas Streams
The presence of even trace elements of water in a gas stream can have a meaningful impact on a process. Moisture analyzers help ensure that gas quality meets the expected standards and that drying or other processes are occurring as designed. The choice of technology for measuring moisture will vary from photometric methods to laser based technology. Which option to select will be determined by the level of moisture to be measured, the gas content, and the demands related to response time.
Explore Rawson’s moisture analyzers for technologies relevant to gas stream applications such as continuous measurement or low moisture detection.
Wobbe and Calorific Value Analyzers for Fuel Gas
The calorific value of a fuel gas is a measure of the energy provided by the gas, whilst Wobbe index provides a means of comparing the combustion characteristics of different types of fuel gas. Depending on the application, determining the calorific value could be used to control burners or flares, as part of verifying fuel composition or for custody transfer purposes. The choice of analyzer will depend on the fuel gas content, the range of values to be measured and the speed of response.
Rawson’s Wobbe and calorific value analyzers are intended for use in applications where the fuel gas heating value or BTU’s are of significance to the process.
Sulfur Analyzers for Natural Gas and Process Streams
The presence of sulfur compounds in natural gas or other process gas can have an impact upon the quality of the fuel and the equipment exposed to the stream. Depending on the source, the target compounds could include hydrogen sulfide (H2S), THT, TBM, DMS or other sulfur species. Measurement of these compounds could be performed to ensure fuel quality and identify levels that may be damaging to equipment or catalysts in refining and petrochemical processing. Before making a selection, the relevant compounds and the anticipated range of concentration should be identified.
Review Rawson’s sulfur analyzers for gas stream applications in which sulfur measurement forms part of quality, process or equipment protection demands.
Frequently Asked Questions
What information should I provide when asking about a gas analyzer?
Does every gas analyzer need a sample conditioning system?
Can gas analyzer readings be connected to a plant control system?
How often should a gas analyzer be calibrated?
Can one analyzer measure several gas components?
Depending on the analyzer type, it is possible to measure multiple components, but the range of gases and the concentration will vary depending on the method and detector and the configuration selected. Clarify the list of targets with the supplier.
Ready to Get a Quote or Need Assistance?
Our team of experts is here to help! Reach out today and let us provide the support & solutions you need.
Next step: Request Quote or contact Rawson regarding your specific application